Epoxy Casting Resin 9002GA-H/9
Epoxy Casting Resin 9002GA-H/9002GB-6892
Epoxy Casting Resin 9002GA-H/9002GB-6892
Introduction：
Room temperature epoxy casting material, excellent electronic properties，satisfying workability of the products sealed by our epoxy ,the epoxy system used for Buzzer、Filter、Relay、Etc.
.Product property
|
Item |
Testing standard |
9002GA-H |
9002GB-6892 |
|
Appearance |
Visual estimation |
Black ropy liquid |
Pale yellow liquid |
|
Specific gravity |
25℃，g/cm3 |
1.60~1.70 |
1.02~1.08 |
|
Viscosity |
40℃，mPa ·s |
2000~4000 |
40~80 |
|
Self life |
Room temperature |
6 months |
6 months |
Technics
|
Item |
Condition |
9002GA-H/9002GB-6892 |
|
Mixing ratio |
WT% |
100:25 |
|
Pot life |
25℃ min |
30 |
|
Gel time |
℃/h |
25℃/24h OR 60℃/2~3h |
After cure
|
Hardness |
Shore-D |
>80 |
|
Volume resistivity |
25℃，Ω·cm |
>1013 |
|
Surface resistivity |
25℃，Ω |
>1014 |
|
Dielectric constant |
25℃，10KHz |
4.2±0.1 |
|
Dissipation factor |
25℃，10KHz |
<0.01 |
|
compressive strength |
Kgf/mm2 |
>30 |
|
dielectric strength |
KV/mm |
>15 |
|
Impact strength |
Kgf/mm2 |
>5.1 |
|
Curing shrinkage |
% |
<0.5 |
|
Hot and cold shock |
-30℃~+100℃,Times |
5 |
Packing
A: 25 kg iron drum or other
B: 20 kg plastic drum or other
Cautions
1. Cautions in use
a) Part A should be agitated before use to disperse sufficiently the settled filler. Or heat it to 40℃ until it is completely dissolved.
b) Weigh both A and B respectively, into specified amounts and mix them uniformly.
2. Cautions in handling
a) It is better to potting in vacuum condition, the mixture should be usd up in permitting time.
b) Cure in room temperature or heat to 60℃, usually items cure under the condition of 25℃/24h or 60℃/2~3h